Zenprox Aerosol
Zenprox Aerosol
Zoecon

Zenprox Aerosol

Regular price $17.45 $0.00 Unit price per
SIZE 16 OZ. CAN
CASE QTY 6 / CASE
MANUFACTURER ZOECON [website]
EPA# 2724-675
ACTIVE INGREDIENT Etofenprox 1.0% Tetramethrin 0.5% Pyrethrin 0.15%
LABEL zoecon_zenprox_aerosol_label_051612.pdf
SDS zoecon_zenprox_aerosol_msds_051612.pdf
TARGET PESTS Ants, Bed Bugs, Carpet Beetles, Cigarette Beetles, Cockroaches, Confused Flour Beetles, Crickets, Earwigs, Firebrats, Fleas, Mole Crickets, Pillbugs, Red Flour Beetles, Sawtoothed Grain Beetles, Silverfish, Sowbugs, Spiders
RESTRICTED USE ·         Do not use or store near heat or open flame. Exposure to temperatures above 130 degrees F may cause bursting. ·         Not for use in food or feed areas of food handling and processing facilities. ·         Do not use directly on animals.
USE Homes, Apartments, Schools, Medical facilities, Offices, Industrial, Storage facilities, Buses, Trains, And any non-food/non-feed handling establishment.
APPLICATION Indoors- Apply as a crack and crevice or spot treatment to areas where pests crawl and hide, especially on hidden surfaces around sinks and storage areas, along and behind baseboards, around doors and windows, behind and under refrigerators, cabinets, sinks and stoves, and on the underside of shelves, drawers and bookcases. Do not reapply more than once every 14 days. Do not apply in food handling areas or allow product to contaminate food. Outdoors- Point spray nozzle away from face. Hold can on slight downward angle. For best results, spray when air is calm. Spray with wind if breeze is blowing. Spray foundation of building where insects are active and may find entrance up to a height of 2 to 3 feet. For ants, spray around nests hidden under steps, brickwork, concrete, etc. Break apart accessible nests and spray on and around debris. Apply as a spray to outside surfaces of buildings where listed insects tend to congregate. Spray areas include screens, window frames, eaves, porches, patios, garages and refuse dumps. Do not reapply more than every 7 days.
PET SAFE Yes, when used as directed on label
YIELD One 16 oz. can will cover up to 500 square feet

 

 

HOW ZENPROX AEROSOL WORKS

Zenprox Aerosol has four active ingredients that work together for broad-spectrum pest control and quick knockdown of pests. Natural pyrethrins attack an insect’s central nervous system, causing paralysis and eventual death. Piperonyl Butoxide has no insecticidal properties of its own, rather it acts as a synergist to keep pyrethrins stable and at extra punch to insecticides. Tetramethrin acts as a more traditional synthetic pyrethroid, while the new active ingredient Etofenprox is a pyrethroid ether rather than an ester. This means Etofenprox has a slightly different chemical structure from most synthetic pyrethroids and makes it especially effective when resistance may be a concern.

Zenprox Aerosol can be sprayed in any direction (even with the can upside down), making it an even more versatile product. Though Zenprox Aerosol has some residual properties, it is best used as a knockdown agent.

TARGET PESTS

Bed bugs, ants, carpet beetles, cockroaches, earwigs, fleas, spiders

PESTS CONTROLLED WITH ZENPROX AEROSOL: Bed bugs, ants, carpet beetles (black, furniture and varied), cigarette beetles, cockroaches, crickets, earwigs, firebrats, fleas, flour beetles (red and confused), grain beetles, mole crickets, pillbugs, sawtoothed grain beetles, silverfish, sowbugs, spiders

TARGET USES

Zenprox Aerosol can be used where the active ingredient in Zenprox liquid concentrate is desired, along with the convenience of ready-to-use aerosol. Zenprox Aerosol is appropriate for quick knockdown of pests in non-food and non-feed areas of listed residences, businesses, and institutions. Zenprox Aerosol is an excellent choice as part of bed bug treatment as it can be used in many areas and is registered for use in all states, including New York.

ACTIVE INGREDIENTS: Pyrethrins 0.15%, Tetramethrin 0.50%, Etofenprox 1.00%, Piperonyl Butoxide, Technical 1.50%

ZENPROX AEROSOL APPLICATION INSTRUCTIONS

Use Zenprox Aerosol both indoors and out. Apply on interior surfaces (away from food handling areas) where insects crawl, and in hard to reach areas where insects hide. Approved for bed bug spot treatment to bed frames, box springs and mattresses.  Outside, spray Zenprox Aerosol on foundations of buildings, as well as on screens, window frames, eaves, porches, patios, garages and garbage areas where insects are active. A 16 oz can of Zenprox Aerosol can cover up to 500 sq ft.

Hold container upright with nozzle away from you. Press valve down and spray surface until slightly wet (at a rate of 2 seconds to treat approximately 1 linear foot of baseboard area). The enclosed crack and crevice straw is useful for hard-to-reach areas and for flushing small spaces where insect may harbor.

*Always read the product label completely before use.

One 16 oz. can covers up to 500 square feet.

STANDARD APPLICATION RATES:

*Press valve down and spray surface until slightly wet at a rate of 2 seconds to treat approximately 1 linear foot of baseboard area.

*For maximum application rate, spray for 24 seconds to cover an area of 5’ x 10’ (50 sq. ft.)

FOR USE IN THE FOLLOWING AREAS:

In and on buildings, structures and their immediate surroundings and on modes of transport: apartment buildings, homes, hospitals; non-food/feed areas of hotels, industrial buildings, laboratories, mausoleums, motels, nursing homes, offices, private residences, schools, stores, utilities warehouses; and in non-food areas of restaurants, food manufacturing, processing, and servicing establishments; on vessels, rail cars, aircraft (do not use in aircraft cabins), buses, trucks, trailers; any non-food/non-feed handling establishment

Indoors-

Apply as a crack and crevice or spot treatment to areas where pests crawl and hide, especially on hidden surfaces around sinks and storage areas, along and behind baseboards, around doors and windows, behind and under refrigerators, cabinets, sinks and stoves, and on the underside of shelves, drawers and bookcases. Do not reapply more than once every 14 days. Do not apply in food handling areas or allow product to contaminate food.

Fleas in buildings: Remove and destroy pet’s old bedding and replace with clean fresh bedding after treatment of pet areas. Apply as a crack and crevice treatment to infested areas such as base boards, windows and door frames, local areas of floors (under the edges of rugs and floor coverings), and between/under cushions or upholstered furniture. As a broadcast application, spray at the maximum rate of 24 seconds to cover 50 square feet. Do not allow pets to reoccupy treated areas until treated surfaces have thoroughly dried. Do not use Zenprox Aerosol directly on pets. Treat dogs and cats with a flea and tick control product before allowing them to reenter the treated area. We recommend using additional methods of control such as frequent vacuuming and use of an approved Insect Growth Regulator (IGR).

Bed Bugs: Thoroughly inspect area of suspected bed bug infestation and note potential harborage sites or actual infestations. Remove and/or pick up clothing and other obstacles that may prevent thorough inspection or treatment. Remove and sanitize infested bedding (pillows and linens), clothing or other items. Apply Zenprox Aerosol on mattresses as a spot treatment to mattress seams, edges, and tufts of bed only. Do not use Zenprox Aerosol directly on mattresses, pillows, bed linens or clothes. Do not saturate the mattress; and do not treat entire surface area of mattress. Allow mattress to dry thoroughly before replacing pillows and/or bed linens. Bed bugs may also harbor in areas of the room away from the bed. Apply as a crack and crevice or spot application where evidence of bed bugs occurs. This includes bed frames, box springs, inside empty drawers and clothes closets, night stands and other furniture in the room, carpet edges, high and low wall moldings (such as floor molding or window casings), wall voids, behind wall hangings and mirrors, wallpaper edges and popcorn ceilings. Remove all clothes and other articles from dressers or closets before application. Take bed apart. Treat joints and channels if hollow, such as square or round tubing, and see that interior framework is treated. Apply as a surface application to carpeting, drapes, and flooring at the rate of 16 ounces per 500 ft². Allow all treated areas to dry thoroughly before use.

Outdoors-

Point spray nozzle away from face. Hold can on slight downward angle. For best results, spray when air is calm. Spray with wind if breeze is blowing. Spray foundation of building where insects are active and may find entrance up to a height of 2 to 3 feet. For ants, spray around nests hidden under steps, brickwork, concrete, etc. Break apart accessible nests and spray on and around debris. Apply as a spray to outside surfaces of buildings where listed insects tend to congregate. Spray areas include screens, window frames, eaves, porches, patios, garages and refuse dumps. Do not reapply more than every 7 days.

ZENPROX AEROSOL FEATURES

*Provides quick killing action

*Labeled for indoor and outdoor use

*Kills quickly on contact

*Ergonomic actuator and 360 degree spray capability

*Includes crack and crevice straw for detailed applications.

EXTRA TIPS

*Zenprox Aerosol is a contact kill only and should not be used as a sole treatment for bed bugs.

*Do not use or store near heat or open flame. Exposure to temperatures above 130 degrees F may cause bursting.

*Not for use in food or feed areas of food handling and processing facilities.

*Do not use directly on animals.

*Do not apply more than once every 7 days outdoors or 14 days indoors.